Xinzheng Industrial Park,Qingyuan West Street,Weifang Economic Development Zone,Shandong,China
diesel generator  +86 15905360231    diesel generator  huaquan@huaquanpower.com
Current Location:HOME > generator 80kva price > Starter drive gear at high speed and not with the judgment of the flywheel ring gear meshing method >
Starter drive gear at high speed and not with the judgment of the flywheel ring gear meshing method
Update:2017-02-09 Tags:the

when starting of diesel engine, 30kw diesel generator pricethe action of electromagnetic switch and can be heard the noise and drive gear of high speed rotating, but not turn the engine flywheel. This failure is due to the drive gear and flywheel ring gear did not mesh or starter drive gear preview. Inspection methods are as follows:

1 in case of this kind of failure, should be the second or third starting again, if the fault cannot be ruled out, use a flat mouth screwdriver adjustment starter electromagnetic switch on the lower left screw, so that the drive gear and flywheel ring gear meshing. If after the adjustment, the fault has not been ruled out, should remove the starter, the flywheel ring gear, the inside of the starter drive gear and other parts for inspection.

2 if after inspection found the starter drive gear and flywheel ring gear quality in good condition, but both are not able to mesh together when starting, there is still a starter motor idling and collision with a metal sound, then response to starter decomposition. If found after decomposition on the fork of the distance between two convex block is too large to drive mechanism can't touch in place, application of hand pressure to reduce the distance between two convex block. If the convex side of the protruding piece of block badly worn or damaged, the welding repair methods are available for processing.

if fork right distance, each other can drive gear and flywheel ring gear meshing, but there is still a high speed idling, starter, then apply the hand holding the armature, rotate the drive gear with the hand. If can turn clockwise and anticlockwise can not turn, then drive mechanism works well; If can rotate clockwise and counter-clockwise, then drive mechanism is damaged, should replace a new one.

Copyright Weifang Huaquan Power Machinery Co.,Ltd
Powered by Huaquan